Heat & Glo FB-GRAND-S Owner's Manual page 23

LOG NUMBER 2 (SRV768-704):
surface of log. Slide the log all the way to the left. Then push the right front corner of the log forward until there is 0.75 in.
between the front right corner of the log and the grate.
LOG NUMBER 3 (SRV768-705):
log. Push down until log is sitting fl at on grate.
LOG NUMBER 4 (SRV582-705):
#4 placed on log #1. The back of log #4 should make contact with the back of the fi rebox.
.75 in.
Position log #2 onto grate such that tabs A and C fi t into the slots on bottom
Position log #3 onto grate such that tab E fi ts into slot on bottom surface of
Place log #4 across both fl at spots on log #1 and log #3, with the "Y" in log
Heat & Glo • FB-IN-S, FB-GRAND-S • 783-910 Rev. G • 11/08
2
3
4
23