Table of Contents
Advertisement
2 2
Operating Instructions
A. Gas Fireplace Safety
WARNING
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass will cause burns.
•
•
•
•
CAREFULLY SUPERVISE children in same room as
fi replace.
•
Alert children and adults to hazards of high temperatures.
High temperatures may ignite clothing or other fl ammable
materials.
•
Keep clothing, furniture, draperies and other fl ammable
materials away.
This appliance has been supplied with an integral barrier
to prevent direct contact with the fi xed glass panel. DO
NOT operate the appliance with the barrier removed.
Contact your dealer or Hearth & Home Technologies if the barrier
is not present or help is needed to properly install one.
If you expect that small children or vulnerable adults may
come into contact with this fi replace, the following precau-
tions are recommended:
•
Install a physical barrier such as:
-
A decorative fi rescreen.
-
Adjustable safety gate.
•
Install a switch lock or a wall/remote control with child
protection lockout feature.
•
Keep remote controls out of reach of children.
Grate
(not shown)
Section 14.H.
Figure 2.1
Fireplace Components
8
User Guide
DO NOT touch glass until it is cooled
NEVER allow children to touch glass
Keep children away
Fixed Glass Assembly
Section14.I.
Clear Space
Section 2.D.
Hearth
(not required)
Heatilator • Caliber Mesh BV Series • 4040-848 Rev G • 10/08
•
Never leave children alone near a hot fi replace, whether
operating or cooling down.
•
Teach children to NEVER touch the fi replace.
•
Consider not using the fi replace when children will be
present.
Contact your dealer for more information, or visit: www.
hpba.org/staysafe.
To prevent unintended operation when not using your
fi replace for an extended period of time (summer months,
vacation, trips, etc):
•
Remove batteries from remote controls.
•
Turn off wall controls.
•
Unplug 3 volt adapter plug and remove batteries on IPI
models.
•
Turn off gas controls valve on standing pilot models.
When lighting the pilot light on fi replaces with a standing
pilot, remove the fi xed glass assembly so you can detect
presence of residual gas build-up. See Standing Pilot
Lighting instructions and Maintenance Tasks.
B. Your Fireplace
WARNING! DO NOT operate fi replace before reading
and understanding operating instructions. Failure
to operate fi replace according to operating instructions
could cause fi re or injury.
Mantel
Section 5.D.
Wall Switch for Fan
Section 12.F.
Remote Control
Outside Air Kit
(behind panel)
Section 9.A.
Advertisement
Table of Contents
