In The Continuous-Feed Mode - Toshiba e-studio 353 User Manual

Making a Copy From the RADF

In the Continuous-Feed Mode:

1. After aligning the edges of originals, place the originals face
up and align the slides to their width. Align the originals in
order from the top because they will be fed from the top. Use
the original stopper as required.
2. Tip: When the number of originals is too large to be set at one
time, you can divide the originals into several sets and set them
one after another. To do so, place the first set of originals first
and press the CONTINUE button while the scanning is in
progress. After they have been scanned, place the next set of
originals.
NOTE: Do not use the following types of originals as they tend
to misfeed or become damaged:
Badly wrinkled or folded originals
Originals with carbon paper
Taped, pasted or clipped (cut out) originals
Clipped or stapled originals
Originals with holes or torn originals
Damp originals
OHP film originals
In the Single-Feed Mode:
1. Align the slides to the desired original size.
2. Insert the original with its face up and straight along the slides.
It will be pulled in automatically. When the original starts
being pulled in, let go of it.
Page 10