Sheet Originals; Book-Type Originals - Toshiba e-studio 353 User Manual

BASIC COPIER OPERATIONS
Making a Copy From the Glass
Making a Copy From the RADF
Paper Level Indicator
Clearing the Functions Selected
Magazine Sort & Saddle Stitch Mode (Booklet Mode)
Hole Punching
Making a Copy From the Glass

Sheet Originals:

1. Raise the original cover or the reversing
automatic document feeder (optional), and
place the original (A) face down on the glass.
2. Align the original against the left rear corner
of the glass.
3. Lower the original cover or the reversing
automatic document feeder (optional) slowly.

Book-Type Originals:

1. Raise the original cover or the reversing
automatic document feeder (optional), and
place the original in the direction shown in
the illustration.
2. Lower the original cover or the reversing
automatic document feeder (optional)
slowly.
3. Do not try to force the original cover or
reversing automatic document feeder
(optional) to fully close over a very thick
original, such as a big book. Copies can be
made even if the cover or feeder does not
close fully.
4. During copying, an intense light may leak out. Do not look at the original glass surface.
Page 9