Toshiba e-studio 353 User Manual page 7

FAX button
8
Press this button to use the Fax/Internet Fax function. (Optional FAX board, printer/scanner kit, or
both printer kit and scanner upgrade kit is required.)
9 PRINT DATA/MEMORY RX/FAX communication
If these lamps light, they show the status of receiving data, receiving original(s) standing by to be
printed and currently used telephone line (
10
INTERRUPT
button
Use this button to interrupt the copying job in process and to perform another copying job. You
can resume the interrupted copying job by pressing this button again.
JOB STATUS button
11
Use this button to confirm each status of print or scan or Fax, and journal for TX or RX of Fax.
12 ACCESS button
Use this button when the department codes have been set. If this button is pressed after copying,
the next user cannot use the copy function without keying in the registered department code.
13
ENERGY SAVER button
If you are not going to use the equipment for a while, press this button. The equipment enters the
energy saving mode and all the display lamps are turned off.
14 FUNCTION CLEAR button
When this button is pressed, all selected functions are cleared and returned to the default settings.
15 STOP button
Use this button to stop an ongoing scan and copy operation.
16 START button
Press this button to start copying, scanning and Fax operation.
17 Digital keys
Use these keys to enter the number of copies you want to make and so on.
18
CLEAR button
Use this button to correct numbers entered with the digital keys such as an incorrect copy quantity.
19
ERROR lamp
ERROR lamp lights in red when an error occurs and the equipment needs some actions.
20 MONITOR/PAUSE button
This button is used when the copier is used as a Fax (optional). (See the [Operator's Manual for
Facsimile Function] for detail.)
21 Touch panel
The state of the copier and directions for its operation are expressed as characters and illustrations.
1 or 2).
Page 5