System Requirements; Installation Instructions - 3Com EtherLink 3C980C-TXM User Manual

88 A
PPENDIX
For detailed information on the 3Com DMI Agent,
including a description of each MIF that is supported by
the 3Com DMI Agent, see the 3Com DMI Agent
User Guide included with the 3Com DMI Agent software
on the 3Com EtherLink Server CD.
For more information on DMI, go to:
http://www.3com.com/managedpc

System Requirements

This section lists the computer and network management
requirements for installing and using the 3Com DMI Agent.
Computer Requirements
Network Management
Requirements

Installation Instructions

This section describes how to install the 3Com DMI Agent
on a computer running Windows NT 4.0.
Before installing the DMI Agent, log on to the computer
with an account that has system administration privileges.
To install the 3Com DMI Agent:
1 Make sure that the computer meets the requirements
listed earlier in
2 Make sure that the NIC is installed in the computer
and is connected to the network.
B: I 3C
NSTALLING THE
DMI Service Provider 2.0 or greater (such as
Smart Technologies Service Provider 2.0)
NDIS 3, 4, or 5 driver
Windows NT 4.0 with Service Pack 3 or 4
Your network management station requires a
DMI-compatible browser or a network management
application that supports DMI 2.0, such as:
Hewlett Packard TopTools
Tivoli Management Suite
Dell OpenManage
Compaq Insight Manager Management Station
Intel LANDesk Client Manager
System
DMI A
OM GENT
Requirements.