Netware; Removing Server Features; Windows Nt - 3Com EtherLink 3C980C-TXM User Manual

NetWare

To remove the network driver:
1 Enter this command at the prompt:
NetWare 4.2: load install
NetWare 5.0: load nwconfig
2 In the Installation Options screen, select
Driver options.
3 In the Driver Options screen, select
Configure network drivers.
The Selected Network Drivers screen appears, listing all
previously saved drivers in the system.
4 From the list of drivers, select 3C980.
5 In the Additional Driver Actions screen, select
Deselect a selected driver and press Enter.
6 Follow the prompts to remove the driver.

Removing Server Features

Follow the steps for your operating system.

Windows NT

To remove DynamicAccess technology server features:
1 From the Start menu, select Settings/Control Panel.
2 Double-click the Network icon.
3 In the Network window, click the Protocols tab.
4 In the Protocols tab, select DAPass Thru Driver
Transport.
5 Click Remove.
6 Follow the prompts to remove the software and
reboot the server.
Removing Server Features 77