Running Nic Diagnostics In Windows; Overview - 3Com EtherLink 3C980C-TXM User Manual

7

Overview

The 3Com NIC Diagnostics program for Windows contains
tests that can check the status of the following items:
To run NIC diagnostic tests on a computer running DOS or
NetWare, use the 3Com Configuration and
Diagnostics program for DOS (3C90XCFG.EXE) located on
the 3Com EtherLink Server CD.
To start the diagnostics program:
1 Make sure that the NIC, the network driver, and the
3Com NIC Diagnostics program are installed.
2 Open the Windows Start menu.
3 Select Programs, and then 3Com NIC Utilities.
4 Click 3Com NIC Doctor.
The 3Com NIC Diagnostics General screen appears.
Click Help to obtain general information about the
function of a screen. To obtain specific information about
any topic on a screen, click the question mark (?) in the
upper right corner of the screen, move it over a topic, and
click once.
5 Click the Diagnostics tab.
The Diagnostics screen appears.
R
UNNING
W
IN INDOWS
Network
NIC
Remote Wake-Up
NIC D
IAGNOSTICS