Specify The Slot Number; Load The Driver; Set Up Another Nic - 3Com EtherLink 3C980C-TXM User Manual

48 C
HAPTER
3C980C_TXM:\nwserver
The Select a Driver to Install screen appears with the 3Com
EtherLink Server NIC driver name highlighted.
8 Press Enter to select the driver.
9 Select Yes at the prompt to confirm the name of the
driver to copy.
The installation program copies the driver to the
appropriate server subdirectory. The Configuration screen
appears.

Specify the Slot Number

You need not specify the slot number if you are installing
only one NIC.
1 In the Configuration screen, select Slot Number.
2 Enter the slot number of the NIC that you want to
install. For example:
10001
See
for instructions on changing other parameters in this
screen.

Load the Driver

1 Select Save parameters and load driver.
The installation program loads the configured driver and
then writes the appropriate LOAD and BIND commands to
the AUTOEXEC.NCF file.
The system assigns a network number.
2 Enter a network number, or press Enter to select the
system-assigned number.
If no errors are encountered, the installation program asks
whether you want to select an additional network driver.
3 Select Yes to set up another NIC.

Set Up Another NIC

1 Follow the prompts for another NIC:
a Select the driver
b Enter the slot number
4: I C
NSTALLING AND
Changing NetWare Driver Configuration Parameters
N W
ONFIGURING IN ET ARE