Upgrading Memory - Ricoh BizWorkz 106 Operation Manual

Upgrading Memory

You can install Single Inline Memory Module (SIMM) to upgrade the on-
board memory of the machine.
The machine is shipped from the factory with a 4MB SIMM, which can be
replaced with an 8MB, 16MB or 32MB SIMM.
Use the following procedure to install 8MB, 16MB or 32MB SIMM.
Note
The following are the required specifications for a SIMM used with this machine:
72-pin, 60ns, Extend Date Out (EDO), parity/non-parity.
Important!
Make sure you touch some grounded metal object with your hand to discharge any
electrostatic charge from your body before handling the SIMM.
Turn off the machine.
1
Remove the SIMM cover located on the
2
left side of the machine.
Pull apart the hooks on the both sides
3
of the SIMM board that hold it in place.
GETTING ACQUAINTED
SIMM
21