To Install The Paper Size Indicator; To Select The Paper Source - Ricoh BizWorkz 106 Operation Manual

Hide thumbs Also See for BizWorkz 106:

Table of Contents

GETTING ACQUAINTED

The actual message that appears on the machine's display depends on the paper

source you last used. If "Upper Tray?" appears, press

to display the "Lower Tray?" message before proceeding with step

After pressing

until the desired size ap-

× 11) ? ↔ A4 ?

When the correct size is on the display,

. "Registered" appears.

To install the paper size indicator

Break off the paper size indicator (1).

Positioning the indicator so the side that

shows the paper size you are using (A4

or Letter) is facing outwards, insert it

into the front of the paper tray (2).

per source appears.

The upper paper tray is selected when

"U" is on the display, and the paper feed

unit is selected when "L" is on the dis-

Refer to page 10 for details on using the upper paper tray.

until the desired pa-

Table of Contents