Other Settings For Type 2; To Remove The Protective Sheet; To Install The Document Output Tray - Ricoh BizWorkz 106 Operation Manual

Other Settings for Type 2

To remove the protective sheet

Open the ADF cover (1) and then re-
1
move the protective sheet (2).
Close the ADF cover and make sure it
2
locks securely into place.

To install the document output tray

Look at the rear of the machine to con-
1
firm where the document output tray
should fit.
Insert the pin at one side of the tray by
2
gently bending the document tray until
it fits in the insert hole.
SETTING UP
1
2
5