Ricoh BizWorkz 106 Operation Manual page 204

Selecting Toner Saving Mode
The toner saving mode status has two settings.
Press
1
Press
2
User Param." appears. The messages
change in the following order.
1 Tray Pap. Size
3 User Param.
Press and press
3
move the flashing block cursor until it
appears in one of the positions shown
in the illustration to the right.
Note
The bits other than the one highlighted in the
illustration are unrelated to this setting.
Press to change the bit setting to
4
1 or 0, as desired.
Display
02:0000 0000 Off (Default)
02:0000 0100 On (Density will be lighter)
Press . "Please wait", then "Reg-
5
istered" appears.
Note
• To cancel this change, press
instead of
and "Not Registered" appear on the display.
• Do not turn off the machine while "Please
wait", "Registered" or "Not Registered"
is displayed.
. "Prt Help List" appears.
or until "3
2 Language
Heater status
. "Please wait"
TECHNICAL REFERENCE
Prt Help List
3 User param.
to
02:0000 0 00
Please wait
Registered
or
O K
59