Yaesu FT-8900R Operating Manual page 26

To set repeater shift manually:
1. Press the
2. Rotate the
3. Press the
desired shift from
4. Press and hold in the
normal operation.0.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press the
2. Rotate the
3. Press the
new repeater shift magnitude.
4. Press and hold in the
normal operation.0.

If you just have one odd split that you need to program, don't change the
default repeater shifts using this Menu item. Enter the transmit and receive
frequencies separately, as shown in Store Independent Transmit
Frequencies on page 34.
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
– , + , and OFF .
knob for ½ second to save the new setting and exit to
DIAL
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
knob for ½ second to save the new setting and exit to
DIAL
OPERATE THROUGH REPEATERS
mode.
Set
Menu #33 RPT.MOD .
mode.
Set
Menu #36 SHIFT .
knob to select the
DIAL
knob to select the
DIAL
Page 26 of 77