To Set The Speed; To Set A Delay Time - Yaesu FT-8900R Operating Manual

4. Press and hold in the
5. Press and hold in the PTT switch.
6. While still holding the PTT switch in, press the Main band
transmit the tone string.
7. Once you have pressed the
as the
Autodialer

To set the speed:

The speed at which the
1. Press the
2. Rotate the
3. Press the
desired speed.
50MS
75MS
100MS
4. Press and hold in the
normal operation.

To set a delay time:

You can also set a longer delay between the time you press the
pressed) and when the first
1. Press the
2. Rotate the
3. Press the
desired time (
4. Press and hold in the
normal operation.0.
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
knob for ½ second to exit to normal operation.
DIAL
key in the above step, you can release the
will transmit the whole
digits are sent can be changed.
DTMF
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
: High: 20 digits per second
: Mid: 13 digits per second
: Low: 10 digits per second
knob for ½ second to save the new setting and exit to
DIAL
0.
digit is sent.
DTMF
momentarily to enter the
SET key
knob to select
DIAL
knob momentarily, then rotate the
DIAL
50MS , 250MS , 450MS
knob for ½ second to save the new setting and exit to
DIAL
string automatically.0.
DTMF
mode.
Set
Menu #14 DTMF S
.
mode.
Set
Menu #13 DTMF D
.
, 750MS , or 1000MS ).
DTMF AUTODIALER
key momentarily to
switch,
PTT
knob to select the
DIAL
key (with switch
PTT
knob to select the
DIAL
Page 54 of 77