Omron E5CN User Manual page 159

Adjustment Level
insh
Upper-limit Temperature Input Shift Value
insl
Lower-limit Temperature Input Shift Value
Function
Setting
See
See
These parameters are used to shift the input temperature at two points: an
upper-limit temperature and a lower-limit temperature (as opposed to the
"temperature input shift" parameter, which shifts the input temperature by set-
ting the shift for only one point). A 2-point shift enables more accurate offset of
the input range compared with a 1-point shift if the input shift values at the
upper and lower limits differ.
This parameter sets input shift values for the upper and lower limits (2-point
shift) of the input range.
Setting range
199.9 to 999.9 C or F
■ Related Parameters
Input type (initial setting level): Page 146
Input shift type (advanced function setting level): Page 172
The "input type" parameter must be
set for a thermocouple or resistance
thermometer and the "input shift
type" parameter must be set to a 2-
point shift, or the "input type" param-
eter must be set for an infrared sen-
sor.
Unit Default
0.0
Section 5-4
137