Log Out Of The System; Turn The System Off - Bosch D621 User Manual

Led command center d621

Hide thumbs Also See for D621:

Table of Contents

Log Out of the System

The system remembers passcodes entered for approximately 10 sec. after you have

stopped pressing keys. To log out of the system, press the [CMD] key twice. The

Cmd LED remains off, acknowledging that you have successfully logged out.

Entry Delay Time (to be filled in by your security company).

You have __________ sec. to enter premises and turn system off.

Turn off the security system by entering your passcode. When the system is on,

you must enter through a designated entry door to prevent an alarm. Opening a

designated door starts the entry delay. During entry delay time, the Command

Center emits a double tone every second to remind you to turn the system off.

Enter your passcode before the entry delay time expires to turn the system off.

If you enter through the wrong door or fail to turn the system off before the entry

delay time expires, you may cause an alarm. If an alarm occurs, silence the alarm

by entering your passcode and call your security company to let them know it is

not an emergency situation.

When the system is All On, the Command Center illuminates the All

On indicator. If the system is Part On/Part 2 On, the Command

Center illuminates the Part On indicator.

9 10 11 12 13 14 15 16

Enter your passcode to turn the system off. Once the system is off,

the Command Center turns the All On indicator or the Part On

indicator off.

D621 User's Guide

Page 13

All

Status

Part

Cmd

All

Status

Part

Cmd

46840D

Table of Contents