Command Center Tones; Table 2: Command Center Tones - Bosch D621 User Manual

Command Center Tones

The Command Center emits several distinct tones and illuminates lights to alert
you to system events as described in Table 2.
Tone Tone Pattern
Fire Alarm – – –
Burglary ____________
Alarm
Trouble
Key Press –
Entry Delay – – – –
Exit Delay – — – — – —
Error – – – –
OK ——
Watch

Table 2: Command Center Tones

© 2003 Bosch Security Systems
D621 User's Guide
Description
When fire point activates, the Command Center
emits a repeated warble tone (on for 2 sec., then
briefly off).
When a burglary point activates while your system
is turned on, the Command Center emits a
continuous warble tone. The sounder remains on
for the duration of the time set by your security
company.
When a system component is not functioning
properly, the Command Center emits a repeated
warble tone. Press [4] to view the trouble. If
problem is point-related, the Command Center
display indicates the faulted point.
Pressing any key on the Command Center sounds a
short pip to indicate the pressed key is accepted.
When you enter the premises through a point
programmed for Entry Delay, the Command
Center emits an intermittent beep to remind you to
turn your system off. If the system is not turned off
before the entry delay expires, an alarm condition
occurs and a report may be sent to your alarm
company.
After you turn your system on, the Command
Center emits an intermittent beep and counts
down the Exit Delay time. If you do not exit before
the exit delay time expires and an Exit Delay point
is faulted, an alarm event begins.
If you press an incorrect key, the Command Center
emits an error tone to indicate an invalid entry.
The error tone is the same warble tone as the
Trouble Tone, but is not repeated.
Indicates a Command Center entry is accepted,
such as a correctly entered passcode. The
Command Center emits a single, high-pitched beep
for 1 second.
Command Center emits a tone to alert you when
any watched point is faulted. The tone varies in
duration, depending on the selected Watched
Tone. (See Select Watch Tone.)
D621 User's Guide
Page 9 46840D