Select Watch Tone (Cmd 62); Table 10: Watch Tones - Bosch D621 User Manual

Select Watch Tone (Cmd 62)

The Watch feature gives you the ability to "watch" points when the system is off.
For example, parents with small children may want a tone to sound whenever a
door or window is opened as a way of monitoring the whereabouts of the children.
Use this command to set the type of response your system produces when a watch
point is faulted. If you wish, you may tell your system to display the point's LED
indicator and sound a short tone whenever certain doors or windows are opened.
See Select Watch Points for information on programming which points in your
system are to be "watched".
1. Make sure your system is off (All and Part indicators are off).
2. Press [CMD] [6] [2]. The Command Center may prompt you to
enter a valid passcode by flashing the Cmd indicator.
3. Enter your passcode if necessary. The Command Center displays
steady the current choice and flashes the other possible choices. The
factory default watch tone setting is Short Beep (Choice 2).
4. Select the type of watch tone you want by pressing the required digit.
See Table 10.
5. If you just want to review (not change) the current watch tone
setting, press [CMD] to exit this function.
© 2003 Bosch Security Systems
D621 User's Guide
I can perform this command.
I cannot perform this command.
Choice # Tone
1 No Tone
2 Short Beep
3 Beep Until Key
4 Beep Until Closed

Table 10: Watch Tones

D621 User's Guide
Page 37 46840D