Selfview - TANDBERG 7000MXP User Manual

D1335403_T7000_MXP_User_Manual

3.2.2 Selfview

Selfview shows the outgoing image. Normally this is the image from the main camera, e.g.
showing the user of the system.
Selfview is useful for single monitor systems to be able to see the outgoing video. On dual
monitor systems you already have selfview on the dual monitor.
How to use Selfview:
1. In a call, press the Selfview button once to switch from far end video to near end video on
the main monitor to see a full screen picture of the outgoing video. Press Selfview again
to turn selfview off and go back to normal.
2. Outside a call, pressing the Selfview button will switch between the near end video and a
black screen on the main monitor.
The above behaviour is similar for both single monitor systems and dual monitor systems.
34