Picture Control - TANDBERG 7000MXP User Manual

4.6.6 Picture Control

Focus, Brightness and White balance are set for auto focus, auto brightness and auto white
balance by default. If you need to set focus, brightness and white balance manually, go to Picture
Control in Video Settings.
Focus
Auto In Auto mode the focus is continuously updated. When moving the camera, the
system will use auto focus for 5 seconds to set the right focus of the new camera
position. After 5 seconds auto focus is turned off to prevent continuous focus
adjustments of the camera.
Manual Use the arrow keys to manually adjust the focus.
Brightness
Auto In Auto mode the brightness is continuously updated.
Manual Use the arrow keys to manually adjust the brightness.
White balance
Auto In Auto mode the white balance is continuously updated.
Manual: To update the white balance manually, select Manual and press OK. A white
object should be held in front of the camera a few seconds before and after
selecting Manual white balance.
Monitor Settings
Brightness Adjust monitor brightness left from 0-16.
Left
Brightness Adjust monitor brightness right from 0-16.
Right
Administrator Settings
169