TANDBERG 7000MXP User Manual page 120

D1335403_T7000_MXP_User_Manual
Wide screen VGA or TV monitor In Wide (native) mode.
VGA Out Quality
The supported range of VGA formats will be optimized for the VGA display monitor based on the
source image.
VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is
recommended to keep this setting in Auto unless your screen doesn't support some of the XGA
or SVGA formats the system is using. Note that the VGA Out port support VESA Power
Management.
Auto
VGA output format will be optimized dependant of the video source format,
refresh and of the EDID information available.
Supported formats are:
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz
WXGA (1280x768) 60Hz
SVGA 800x600 VGA output format is forced to SVGA format (800x600) 75Hz
75Hz
XGA 1024x768 VGA output format is forced to XGA format (1024x768) 60Hz
60Hz
PC Picture Format
PC Picture Format setting only takes effect when TV or VGA Monitor Format is set to Wide. Use
this setting to determine if you want your PC presentations to be shown stretched in full screen,
or with correct aspect ratio using part of the widescreen display. With the VGA Out Quality set to
Auto the presentation will be of the best possible quality supported by the monitor.
Normal VGA output will have 4:3 aspect ratio on wide screen monitor.
Wide VGA output will utilize the wide screen monitor at full.
120