Ip Mode - Symbol MC3000 Integrator Manual

7-18 MC3000 Integrator Guide
When a user selects None as an authentication and TKIP as an encryption, the user is forced to enter a passkey. The user cannot enter
a passkey if the encryption is TKIP and the authentication is anything other than None.
Tap Next. The IP Mode dialog box displays.

IP Mode

Use the IP Mode dialog box to configure network address parameters: IP address, subnet, gateway, DNS and WINS.
Encryption
Select Dynamic Host Configuration Protocol (DHCP) from the IP Mode drop-down list to obtain a leased IP
DHCP
address and network configuration information from a remote server. DHCP is the default setting for the
mobile computer profile. When DHCP is selected, the IP address fields are read-only.
Static Select Static to manually assign the IP, subnet mask, default gateway, DNS and WINS addresses used by the
mobile computer profile.
Select either DHCP or Static from the drop-down list and then tap Next. If Static IP is selected, the IP Address Entry dialog box
displays. If DHCP is selected, the Transmit Power dialog box displays.
Figure 7-22. Passkey Dialog Box
Figure 7-23. IP Config Tab (DHCP)
Table 7-12. IP Mode Options
Description