Led Charge Indications; Communication Setup - Symbol MC3000 Integrator Manual

2-6 MC3000 Integrator Guide

LED Charge Indications

The Single Slot Serial/USB cradle uses the amber Charge LED Indicator to indicate MC3000 battery charging status and the Spare
Battery Charging LED to indicate spare battery charging status. See
LED
Mobile Computer Charging (LED on mobile computer)
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber
Spare Battery Charging (LED on cradle)
Off
Fast Blinking Amber
Slow Blinking Amber
Solid Amber

Communication Setup

To connect the Single Slot Serial/USB cradle to a serial or USB device:
1. Connect Single Slot Serial/USB cradle cable to the communications port.
2. Slide the mobile computer into the mobile computer slot. The amber Charge LED Indicator indicates the mobile computer
battery charging status and that the mobile computer is seated in the cradle. For more information on communications setup
procedures, see USB Connection Setup on page 2-32
Table 2-1. LED Charging Status Indicators
Mobile computer not placed correctly in the cradle; cable not connected correctly; charger is not powered.
Error in charging; check placement of mobile computer.
Mobile computer is charging.
Charging complete.
Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery
power is low or the battery is not fully inserted.
No spare battery in slot; spare battery not placed correctly; cradle is not powered.
Error in charging; check placement of spare battery.
Spare battery is charging.
Charging complete.
and/or
Table 2-1 for charging status indications.
Indication
Serial Communication Setup on page 2-30.