Spare Battery Charging; Led Charge Indications - Symbol MC3000 Integrator Manual

2-16 MC3000 Integrator Guide

Spare Battery Charging

To charge up to four MC3000 spare batteries:
1. Insert the spare battery into the spare battery charging slot, bottom first.
2. Pivot the top of the battery down onto the contact pins.
Power Supply
Spare Battery
Charging LEDs (4)
3. Gently press down on the battery to ensure proper contact. The Standard Battery usually charges in less than four hours and
the Extended Life Battery usually charges in less than six hours. See
4. When charging is complete, press the battery clip and lift battery out of the slot.

LED Charge Indications

The Spare Battery Charging LEDs indicate the spare battery charging status. The Spare Battery Charging LEDs are arranged in the
same pattern as the spare battery charging slots so that the charging status of each battery can be identified. See
2-6 for charging status indications.
Spare
Battery
Charging
Slot
Figure 2-14. Four Slot Spare Battery Charger
2
Battery
1
Clip
Spare
Batteries
Table 2-1 on page 2-6 for charging status indications.
Table 2-1 on page