Garmin Socata TBM850 Pilot's Manual page 473

Mode
TAS System Test
Initiated
TAS Operating
TAS Standby
TAS Failed*
* See Table 6-34 for additional failure annunciations
If the traffic unit fails, an annunciation as to the cause of the failure is shown in the center of the Traffic Map
Page. During a failure condition, the Operating Mode cannot be selected.
Traffic Map Page
Annunciation
DATA FAILED
The annunciations to indicate the status of traffic information appear in a banner at the lower left corner of
maps on which traffic can be displayed.
Traffic Status Banner
Annunciation
TA OFF SCALE
TA X.X ± XX ↕
TRFC FAIL
NO TRFC DATA
*Shown as symbol on Traffic Map Page
**Shown in center of Traffic Map Page
190-00709-04 Rev. A
Traffic Mode Annunciation
(Traffic Map Page)
TEST
(also shown in white in center of page)
OPERATING
STANDBY
(also shown in white in center of page)
FAIL
Table 6-33 TAS Modes
NO DATA
Data is not being received from the TAS unit
Data is being received from the TAS unit, but the
unit is self-reporting a failure
FAILED Incorrect data format received from the TAS unit
Table 6-34 TAS Failure Annunciations
A Traffic Advisory is outside the selected display range*.
Annunciation is removed when traffic comes within the
selected display range.
System cannot determine bearing of Traffic Advisory**.
Annunciation indicates distance in nm, altitude separation
in hundreds of feet, and altitude trend arrow (climbing/
descending).
TAS unit has failed (unit is self-reporting a failure or
sending incorrectly formatted data)
Data is not being received from the TAS unit
Table 6-35 TAS Traffic Status Annunciations
Garmin G1000 Pilot's Guide for the Socata TBM 850
HAZARD AVOIDANCE
Traffic Display Status Icon
(Other Maps)
Description
Description
459