l) V4 is now loaded into the flight plan as shown in Figure 5-114.
5) Making V4 the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight ULNAZ. The TO waypoint of the leg is selected in order to activate the
leg.
c) Select the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-115. Note the TOP to
ULNAZ leg is actually part of V4.
190-00709-04 Rev. A
Figure 5-114 V4 is Loaded in the Flight Plan
Figure 5-115 Comfirm Active Leg
Garmin G1000 Pilot's Guide for the Socata TBM 850
FLIGHT MANAGEMENT
281