Naming Memory Channels; Setting Name-Tag; Using The Channel Name Function - Alinco DJ-175 T Instruction Manual

5.Useful Functions
5.4

Naming Memory Channels

In the Memory mode, it is possible to display up to 6 alphanumeric characters (Name-
tag) instead of conventional frequency display.

5.4.1 Setting Name-Tag

1. Select the memory channel.
2. Press the FUNC key, and while
3. [A ] flashes on the display.
4. Rotate the dial to select a character to be the first digit.
5. Press the
flashing.
6. Repeat the same sequence as necessary.
Press the
5
7. Press any key (except MONI,

5.4.2 Using the Channel Name Function

• Programmed memory channels are displayed with alphanumeric characters. The
channel number is displayed as it normally is.
• Press the FUNC key to display the frequency display for 5 seconds. Pressing certain
keys during this 5 sec period may immediately recall the alphanumeric display,
while other keys access their allocated functions.
32
is displayed press the
key to input the next character. The previous character will stop
key during setting to delete all characters.
,
key.
) to complete the setting.