Switching Off The Tone Squelch; To Differentiate The Enc/Dec Tones; Tone Squelch Operation; Dcs - Alinco DJ-175 T Instruction Manual

6.Selective Calling

6.1.2 Switching Off the Tone Squelch

Press the
key other than the MONI key to complete the setting.

6.1.3 To Differentiate the ENC/DEC Tones

It is possible to set the encode and decode tones independently in the Tone Squelch
Setting mode.
• To set the encode tone, when
set automatically to the same tone.
• To differentiate the decode tone, select another tone in

6.1.4 Tone Squelch Operation

The squelch unmutes only when the signal with the same decoding-setting tone is
received.
6.2

DCS

6.2.1 Setting the DCS

6
1. Press the FUNC key, and while
"
setting is 023.
Each time you press the
2. Press any key other than the MONI key to complete the setting. Observe that
"
36
key in Tone Squelch Setting mode to select TCS-OF, then press any
" is displayed on the LCD, and the DCS code is displayed. The initial
" is displayed.
displayed, select a desired tone. The decode tone is
is displayed on the LCD, press the
key, the display switches between:
DCS
023 DCS-OF
status.
key.