Generating The Auto Dialer Codes; Redial - Alinco DJ-175 T Instruction Manual

3. Use the DTMF key to input the DTMF tones.
For example: when programming 123456789, the display changes as follows:
[ 1] –> [
[345678] –> [456789]
• To set a pause instead of a tone, press the FUNC key, and while
press the
The pausing time is approx. 1 second.
• Press the FUNC key, and while
to see the hidden characters.
• To clear the programming, press the FUNC key, and while
key.
4. Press the PTT key to complete the programming.

6.4.2 Generating the Auto Dialer Codes

Please program the Auto Dialer memory channel(s) in advance.
1. Press the key. "DIAL" is displayed on the LCD.
2. Press one of the
automatically generate the DTMF tones.
Auto Dialer Operation While Transmitting
1. While pressing the PTT key, press the FUNC key. "DIAL" is displayed on the
LCD. Don't release the PTT to proceed.
2. Press one of the

6.4.3 Redial

This function generates the last DTMF tones used by the unit.
1. Press the key while the unit is receiving.
2. Press the
manually input DTMF code) is automatically generated from the speaker. The unit
doesn't transmit the tones in this operation.
3. To transmit, press the FUNC key while pressing the PTT key, then the
Please note that you must operate the DTMF tones at least once to proceed above.
12] –> [ 123] –> [ 1234] –> [ 12345] –> [123456] –> [234567] –>
key. "-" is displayed for a pause.
is displayed, rotate the dial to scroll the display
to key (corresponding to memory #1~#9) to
to key to automatically transmit the DTMF tones.
key. The last DTMF tones (either the auto dialer code or a
6.Selective Calling
is displayed ,
is displayed, press the
key.
6
39