Connecting To The Ethernet Interface - Ricoh Aficio MP 2510 Operating Instructions Manual

Connecting the Machine

Connecting to the Ethernet Interface

This section describes how to connect 10BASE-T or 100BASE-TX cable to the
Ethernet interface.
1
Important
❒ If the main power switch is on, turn it off.
A
A ferrite core for the Ethernet cable is supplied with this machine. Make a
loop in the cable about 9cm (3.5 inch) (1) from the machine end of the cable.
Attach the ferrite core.
B
Make sure the main power switch of the machine is off.
C
Connect the Ethernet interface cable to the 10BASE-T/100BASE-TX port.
6
AEV047S
AJO006S