Ricoh Aficio MP 2510 Operating Instructions Manual page 101

❖ Quick Operation Key1-3
Frequently used functions programmed as Quick Operation keys are shown
on the menu immediately after the power is turned on.
The Quick Operation keys can be programmed with the following functions:
• Journal
• TX File Status (Transmission File Status)
• Print Conf. RX (Print Confidential Reception)
• Print Memory Lock
• Stored File
• Send Later
• Auto Document
• 2 Sided Original
• Closed Network
• Polling TX (Polling Transmission)
• Polling RX (Polling Reception)
• Fax Header Print
• Label Insertion
• RX File Status (Reception File Status)
• Forwarding
• Transfer Request
• Switch RX Mode (Reception Mode Switch)
• Manual E-mail RX
(when the Internet Fax is set to ON.)
• TX Status Report (Transmission Status Report)
• Sender Settings
• E-mail TX Results (E-mail Transmission Results)
Up to three functions can be programmed to a Quick Operation keys.
The default setting for Quick Operation key 1 has not been set.
The default setting for Quick Operation key 2 is TX File Status.
The default setting for Quick Operation key 3 is RX File Status.
A Press [Facsimile Features].
B
Press [Gen. Settings/ Adjust].
C Press [TNext].
D Press [Quick Operation Key].
E
Select the Quick Operation Key you want to program.
General Settings/Adjustment
4
93