Read-Write Error Recovery Page (01H) - Maxtor ATLAS 10K IV User Manual

SCSI Description
Field Default Value
PS
DUA
5.14.6

Read-Write Error Recovery Page (01h)

The Read-Write Error Recovery page controls the drive's response to error
conditions that arise during the course of READ (6), READ (10), WRITE (6),
WRITE (10) command processing and during the write portion of WRITE AND
VERIFY command processing. The Read-Write Error Recovery page format and
field descriptions are described in Table 5-62 and Table 5-63 respectively.
Table 5-62
Bit
Byte
0
1
2 AWRE
3
4
5
6
7
8
9
10 – 11
5-42 Maxtor Atlas 10K IV
Unit Attention Condition Page (Page 0)
Table 5-61
Parameters Savable. This bit is only used with the MODE SENSE com-
mand. A returned value of 1 indicates that the target is capable of sav-
1
ing the page in a non-volatile, vendor-specific location. The bit is
reserved with the MODE SELECT command.
Disable Unit Attention. When set to the default value of 0, the drive re-
0 ports a CHECK CONDITION for any UNIT ATTENTION condition
(power-on, SCSI bus reset, etc.)
Read-Write Error Recovery Page-(Page 1)
7 6 5
PS Rsvd
ARRE TB
Description
4 3
Page Code (01h)
Page Length (0Ah)
RC EER
Read Retry Count
Correction Span
Head Offset Count
Data Strobe Offset Count
Reserved
Write Retry Count
Reserved
Recovery Time Limit
2 1 0
PER DTE DCR