Maxtor ATLAS 10K IV User Manual page 106

SCSI Description
Table 5-54
Mode Parameter Header
Table 5-55
Bit
Byte
0
1
2
3
Table 5-56
Mode Data Length
Device-specific Parameter
Block Descriptor Length
Table 5-57
Bit
Byte
0 – 3
4
5 – 7
5-40 Maxtor Atlas 10K IV
Mode Parameter List-Field Descriptions
Field
Block Descriptor
Page(s)
Mode Parameter Header (6-Byte)-Data Format
7 6 5
Mode Parameter Header- Field Descriptions
Field
Medium Type
Mode Parameter Block Descriptor-Data Format
7 6 5
Description
Contains information about the remainder of the pa-
rameter list and is always present (see Table 5-55 and
Table 5-56).
Allows the initiator to set the drive's Logical Block
Size and number of Logical Block Addresses (see Ta-
ble 5-57 and Table 5-58).
The page code(s) of the pages that are a part of this
command.
4 3
Mode Data Length
Medium Type
Device-Specific Parameter
Block Descriptor Length
Description
Reserved. Must be 0.
Ignored by the drive.
Ignored by the drive.
Zero (0) if no Block Descriptor is supplied. The length
is eight (8) if a Block Descriptor is supplied.
4 3
Number of Blocks
Reserved
Block Length
2 1 0
2 1 0