Table 5-116 Persistent Reservation Out Command's Service Action Descriptions - Maxtor ATLAS 10K IV User Manual

Table 5-116 provides detailed descriptions of each of the PERSISTENT
RESERVATION OUT command's seven possible service actions (Service Action
codes appear in bits 0 – 4 of Byte 1).
PERSISTENT RESERVATION OUT Command's Service Action Descriptions
Table 5-116
Code Name
When the command executes a Register service action, it registers a reservation key with a
device server without generating a reservation. The device server holds these reservation
keys from each initiator that performs a PERSISTENT RESERVATION OUT command
with a Register service action until the key is changed by a new PERSISTENT RESERVA-
TION OUT command with Register service action from the same initiator, or until the ini-
tiator registration is removed by:
00h Register
When a reservation key has not yet been established or when the reservation key has been
removed, a reservation key of 0 is used when the initiator performs a PERSISTENT RES-
ERVATION OUT with the Register service action. When the reservation has been removed,
no information is reported for the initiator in the Read Keys service action of the resulting
PERSISTENT RESERVATION IN command.
A PERSISTENT RESERVATION OUT command with Reserve service action creates a
persistent reservation with a specified Scope and Type.
Persistent reservations are not superseded by a new persistent reservation from any initiator
except by the execution of a PERSISTENT RESERVATION OUT command that specifies
either a Pre-empt or Pre-empt and Clear service action. New persistent reservations that do
01h Reserve not conflict with an existing persistent reservation execute normally. Persistent reservations
of logical units or extents having the same Type value are permitted if no conflicting persis-
tent reservations are held by another initiator. When these types of overlapping reservations
are released, each of the extent reservations and logical unit reservations are removed with
a separate Release service action. Multiple identical reservations from the same initiator are
all released simultaneously via a single Release service action that matches the reservations.
Description
• Powering down the logical unit, if the last
Activate Persist Through Power Loss
(APTPL; see Figure 5-55 and Table 5-61)
received by the device server was 0;
• Performing a Clear service action;
• Performing a Pre-empt service action;
• Performing a Pre-empt and Clear service
action; or
• Performing a Register service action from the
same initiator with the value of the service
action reservation key set to 0.
SCSI Description
Maxtor Atlas 10K IV 5-81