Check Message" Printouts - imagistics sx1480 Manual

"Check Message" printouts

If a fax call ends and your machine detects an error, it will print a
"Check Message" report. This printout lists the following informa-
tion:
• The error code.
• A communications error messages (see below).
• The phone number (or TTI) of the remote fax machine.
• The phone line number (line #1 or line #2 on your machine).
Error messages and their meanings
The error messages below are in addition to those listed in the
"Error Message" section of your machines operating instructions:
Error code
D.0.10
D.0.12
D.0.13
T.3.2
T.8.1
T.8.10
T.8.11
R.1.5
R.8.1
R.8.10
R.8.11
3-2
Error message
Confirm line setting
Check the Tx and Rx
settings
Check PBX/PSTN
Setting
Check no. dialed and
line type
Check PBX/PSTN
Setting
Check no. dialed and
line type
Check condition of
remote fax
Possible meanings
The machine couldn't call because the
line is set for reception only.
The machine couldn't call because the
location number contains a dialing
character (/X) for PBX, but the line is
set for an outside line (PSTN).
The machine couldn't call because the
line is an inside line, and the loca-
tion number does not contain a PSTN
access number.
The line or the remote fax machine
prevented communication.