Transmission
NOTE: • Real time transmission is available only on Line 1.
• You cannot manually redial when you transmitted over the Line 2.
• Sending and receiving documents using monitor or the handset
are only available over the Line 1, regardless of the preset line
mode.
Dialing to a PSTN
Enter the remote fax number, and press [Start].
If you select the number using a one-touch key or Address Book
Entry, there is no need to press [Start].
If transmission fails, confirm that you performed the settings cor-
rectly.
Dialing within a PBX
If you have selected "PBX" for the line you're using on your machine,
you must enter the "/X" character when dialling from one PBX exten-
sion to another PBX extension. This character tells your machine not
to dial the PSTN access code, which your machine uses to reach an
outside line.
PBX dialing with the numeric keys
For fx2080 users
1
Use the numeric keys to enter an extension number.
2
Press [PBX] to enter the "/X" character.
3
Press [Start] to dial the number.
2-1