Pbx Dialing With The Autodialler - imagistics sx1480 Manual

PBX dialing with the autodialler

If using the autodialer (includes the batch transmission and pro-
grammable one-touch) to dial from one PBX extension to another,
you must include the "/X" character into the autodialer number you
programmed, as described below.
NOTE: The following instructions presume you are familiar with how to
set and use your machine's autodialer. If necessary, consult your
machine's manual.
For fx2080 users
1
Use the numeric keys to make a normal address book entry.
Enter the number exactly as your machine should dial it.
2
Press [PBX] to enter the "/X" character.
3
Press [Enter] to save the number.
4
Autodial the number as usual by using the address book.
For sx1480 users
1
Use the numeric keys to make a normal autodialer entry.
Enter the number exactly as your machine should dial it.
2
Press [Pause /Dial Options] repeatedly until "/X" character is
displayed and press [Enter].
01:Fax Number
1234/X
3
Enter a name and press [Enter].
4
Autodial the number as usual, either using a one-touch key or a
speed-dial number.
2-3