Manual Line Selection; Selecting The Phone Line Manually - imagistics sx1480 Manual

Manual line selection

When you have selected "Manual Select" or "Manual" in the Trans-
mit line mode setting, you can select the line manually for each
transmission.
When you perform a batch transmission, fax forwarding or F-code
relay transmission, you cannot select the line. The machine will
transmit using the line designated as the main line in the Transmit
line mode setting.
NOTE: If necessary, refer to the "Transmit line mode" setting described on
page 1-9 for fx2080, or on page 1-12 for sx1480.

Selecting the phone line manually

For fx2080 users
1
Change to the Fax mode by pressing [FAX].
2
Press [Others] on the standby screen.
3
Press
4
Press [SelectLine].
5
Select the line to use, and press [Enter].
6
Enter the remote fax number using an Address Book Entry or
the numeric keys.
2-4
.