Network/Ports Menu - Lexmark M5100 Series User Manual

Understanding the printer menus
Use
Network [x] Setup Page
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Asset Report

Network/Ports menu

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu. All inactive ports are omitted.
To
Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Notes:
•
This menu item is available only when more than one network option is
installed.
•
This menu item appears only in network printers or in printers connected
to print servers.
Print a list of profiles stored in the printer.
Note: This menu item appears only when LDSS is enabled.
Print a report of all the fonts available for the printer language currently set in
the printer.
Note: A separate list is available for PCL and PostScript emulations.
Print a list of all the resources stored in an optional flash memory card or printer
hard disk.
Notes:
• Job Buffer Size must be set to 100%.
• Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.
• This menu item appears only when an optional flash drive or printer hard
disk is installed.
Print a report containing printer asset information, such as serial number and
model name.
To
Allow the printer to connect to a network.
Notes:
•
Auto is the factory default setting.
•
This menu item appears only if an optional network adapter is installed.
166