Scan From The Onetouch Button Panel; Features Of The Onetouch Button Panel - Xerox DocuMate 3640 User Manual

Scan from the OneTouch Button Panel

Scanning from the button panel on your computer's screen works like pressing a button on the scanner.
The scanner scans the item, then sends the image to the Destination Application indicated by the
button's icon.
To scan from the OneTouch Button panel:
1. Load the documents into the scanner.
2. Click on the OneTouch icon in the Windows notification area (at the lower right corner of the
screen.)
3. The OneTouch Button Panel opens.
4. Click the button you want to use to scan.
5. The scanner starts scanning and the image is sent to the selected destination for the OneTouch
button you are using to scan.

Features of the OneTouch Button Panel

The OneTouch panel is your on-screen set of controls for the scanner. From the panel you can access
the hardware settings for your scanner and configure the Scan button.
Click on the OneTouch icon to open the panel.
The Detail View
50 ®
Xerox DocuMate
User's Guide
OneTouch Icon
The Button View
®
3640
The Hardware View