Clock Setting - Toshiba SD-V392SU2 Owner's Manual

Basic setup

Clock setting

The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches for
a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
AUTO CLOCK setting
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
1
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
2
Plug the AC Power cord to the AC outlet.
3
Make sure the DVD/VCR is turned off.
• If you press POWER, the Auto Clock
set is not programmed.
Wait at least three minutes and press
4
POWER.
5 Press CALL to check the clock setting on
the on screen display.
CALL
DISPLAY
6
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
AUTO CLOCK adjustment
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
24
J2D81001A (E)p18-25.p65
8 : 47 MON CH 125
AM
STEREO SAP
00 : 00 : 00 SP
24
To set AUTO CLOCK to off
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want AUTO CLOCK setting:
1 Press VCR MENU.
VCR MENU
SETUP
2
Press SET + or – to select "SYSTEM SETUP",
then press ENTER.
SET +
CH – CH +
ENTER
SET –
3
Press SET + or – to select "AUTO CLOCK".
SET +
CH – CH +
ENTER
SET –
4
Press ENTER to select "OFF".
SET +
CH – CH +
ENTER
SET –
5
Press VCR MENU repeatedly to return to the
normal screen.
• When the AUTO CLOCK is set to
VCR MENU
"OFF", the AUTO CLOCK adjust-
SETUP
ment does not function.
• Set the clock manually
28/5/04, 1:52 PM
CALL
POWER
VCR DVD
1,5
2,4
2,3
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
SAP ON OFF
CH SETUP
SYSTEM SETUP
+/–/ENTER/MENU
MENU
TIMER REC SET
AUTO REPEAT ON OFF
SAP ON OFF
CH SETUP
SYSTEM SETUP
+/–/ENTER/MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/–/ENTER/MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/–/ENTER/MENU
.
26