Notes On Maintaining The Performance Of The System - Sony CSM-100BS Operating Instructions Manual

Notes on Maintaining the Performance of
the System
Pay attention to the following points when handling
the system equipment and media, so as not to damage
them and to maintain top performance.
Handling the unit
Avoid vibration or shock, which may cause damage to
or malfunction of the system.
• Do not block the ventilation holes of each unit.
• Periodic maintenance of the system is recommended
in order to maintain top performance.
Handling the media
• Do not bring it close to a device with a strong
magnetic field.
• Do not touch the tape inside a cartridge.
Location
Do not use or keep the system equipment and media in
a place with any of the following conditions:
–High humidity
–High temperature
–Direct sunlight
–Dust
–Vibration
–Extreme temperature changes
–Not level
Cleaning
Clean the system equipment with a cloth lightly
moistened with warm water or a mild detergent
solution, then wipe with a dry cloth.
Do not use any type of solvent, such as thinner or
alcohol, which may damage the finish.
For the cleaning of the S-AIT drive, refer to the
operation manual for the drive.
Transportation
When you transport the system, be sure to remove the
PetaSite Control Unit and pack the system equipment
with the transporting brackets attached and using the
packing materials for them.
A specially trained technician must remove the
PetaSite Control Unit.
8(E)
Mounting the PetaSite Control Unit
A specially trained technician must mount the PetaSite
Control Unit.