Display Panel - Sony CSM-100BS Operating Instructions Manual

Display Panel

1 INITIAL button
2 READY indicator
3 BUSY indicator
POWER READY BUSY ERROR
INITIAL
5 Display window
6 MENU button
7 Arrow buttons
8 ENTER button
9 ESC/CLR button
1 INITIAL button
Holding this button pressed for more than five seconds
while "Initial Request" or "Full Initial Request" is
shown in the display window initializes the system.
While the system is being initialized, the BUSY
indicator is lit.
Each time the power is turned on, the system must be
initialized.
If Auto Initial on the Set Up menu is activated, the
system is automatically initialized after the power is
turned on.
2 READY indicator
This indicator lights when the system is ready to be
operated.
3 BUSY indicator
This indicator remains lit while the system is
operating.
It is also lit during initialization.
4 ERROR indicator
This indicator lights if some trouble occurs in the
system.
Perform the following according to the message that
appears in the display window.
4 ERROR indicator
ESC/
F
MENU ENTER
CLR
G g
f
When "Initial Request" or "Full Initial Request"
appears:
Press the INITIAL button to reinitialize the
system.
When "Power off Request" appears:
Turn the power off and then on again.
If the problem persists after executing the above,
consult Sony service personnel.
5 Display window
The operating condition, menu items, or values are
displayed here.
6 MENU button
Pressing this button displays one of the menu items in
the display window. If the display window is closed
when you press the button, the window is turned
opened. Press the button again.
For details, see "Menu Operation" on page 20(E).
7 Arrow buttons
During menu operation, press one of the lit arrow
buttons, and one of the following menu items or values
will appear.
8 ENTER button
During menu operation, pressing this button registers
the set value.
9 ESC/CLR (escape/clear) button
Pressing this button restores the status of one step
before.
11(E)