Toshiba B-SA4TP SERIES Owner's Manual page 64

2. PRINTER SETUP
(2) USB INTERFACE
Installation starts by the operating system's plug-and-play function.
Windows 98/Me
(1) Turn the printer ON, then connect it to your host computer with the USB cable.
The "New Hardware Found" dialog box is displayed, and "USB Device" is detected.
(2) After a while, the "Add New Hardware Wizard" dialog box is displayed.
Select "Specify the location of the driver (Advanced)", then click on the [Next] button.
E2-50
ENGLISH VERSION EO1-33048
2.8 Installing the Printer Drivers