2. PRINTER SETUP
2.3 Loading the Media
(Cont.)
CAUTION!
Make sure that the Upper
Sensor Ass'y is closed when
placing the Media Holder Ass'y
into the printer. If the Upper
Sensor Ass'y is opened, it may
be damaged.
NOTE:
Be careful of the orientation of the
Media Holder Ass'y and the media.
5. Put the Media Holder (Left) onto the Media Shaft. Push the Media
Holder (Left) and the Media Holder (Right) against the media until the
media is held firmly in place. This will automatically centre the
media.
Media Holder (Left)
6. Fold the Release Lever to lock the Media Holder (Left).
Release Lever
7. Place the Media Holder Ass'y into the printer.
Upper Sensor
Ass'y
8. Slightly push the Upper Sensor Lever inside ( ), and open the Upper
Sensor Ass'y ( ).
Upper Sensor
Ass'y
E2- 4
ENGLISH VERSION EO1-33048
2.3 Loading the Media
Media Holder (Right)
Media Holder (Left)
Media Holder Ass'y
Upper Sensor Lever