Measurements; Ormal Measurement - A&D UA-789 XL Instruction Manual

Model UA-789XL is designed to detect the pulse and to inflate the cuff to a
systolic pressure level automatically. If your systolic pressure is expected to
exceed 230 mmHg, read "Measurement With The Desired Systolic
Pressure" on the next page.
Normal Measurement
1. Place the cuff on the arm (preferably the left arm).
Sit quietly during measurement.
2. Press the
START
The average blood pressures and last data
number are displayed briefly. Then the display
changes, as indicated in the figure at the right,
as the measurement begins. The cuff starts to
inflate. It is normal for the cuff to feel very tight.
A pressure bar indicator is displayed, as in the
figure at the right, during inflation.
Note: If you wish to stop inflation at any time,
press the
3. When inflation is complete, deflation starts
automatically and
indicating that the measurement is in progress.
Once the pulse is detected, the mark blinks with
each pulse beat.
Note: If an appropriate pressure is not
obtained, the device starts to inflate
again automatically.
4. When the measurement is complete, the
systolic and diastolic pressure readings
and pulse rate are displayed. The cuff
exhausts the remaining air and deflates
completely.
5. Press the
START
off the power.
Note: Model UA-789XL is provided with an
automatic power shut-off function.

Measurements

button.
button again.
START
(heart mark) blinks,
button again to turn
English 10
At heart level
button
START
Averaged data
Data number
Starts inflation
Pressurizing
Measurement
in progress
Systolic pressure
Diastolic pressure
WHO classification
Pulse rate
Exhausts remaining
air automatically
START