Using External Units - Sharp MD-ZV30 Operation Manual

SM <P=001>

USING EXTERNAL UNITS

Connecting external units
Before starting operation:
Before connecting external units, turn off the power to each external unit.
Connect each plug completely. If the units are not connected correctly, it may not be possible to record or playback
properly.
Recordings made from other equipment are made through an analogue connection.
INPUT
MONITOR
AUX
LEVEL
OUT
MIN MAX
Phono plug
Stereo 3.5 mm
plug
RESET
PHONES
AM ANTENNA
MONITOR AUX INPUT MIC
OUT LEVEL (STEREO)
AC INPUT MIN MAX
INPUT
MONITOR
AUX
LEVEL
OUT
MIN MAX
Phono plug
Stereo 3.5 mm
plug
RESET
PHONES
INPUT AM ANTENNA
MONITOR OUT AUX LEVEL MIC
(STEREO)
AC INPUT MIN MAX
DISC-1 1
DISC-2
2
DISC-3
3
CD PLAY
ON/STAND-BY CD
VOLUME
3D SURROUND TUNER
MODE ON/OFF (BAND) TRACK START
1 2 3
CD MD DIGITAL EDIT
MD/CD/TUNER DIRECT KEY
1 2 3
6 7 8
ST-MODE TUNER
10 BAND
PROGRAM CLEAR P-MODE
REC AUTO
REC
2 MODE MARK
1 2 3
1 2 3
SLEEP DISPLAY TIME
BASS/
ON/
AUX
STAND-BY TREBLE
AUX
PHONES
MONITOR INPUT
AUX
OUT LEVEL
MIN MAX
AC INPUT
4
Other stereo etc.
To listen to the playback from this unit through other
equipment
Connect the MONITOR OUT socket to the input of the other
equipment using an RCA lead.
LEFT
RIGHT
Note:
To the input socket
(CD or AUX)
Other stereo etc.
To listen to playback from other equipment or record it
through this unit
Connect the AUX socket to the input of the other equipment
using an RCA lead.
LEFT
RIGHT
To the line out-
Listening to sound from an external unit
put socket
1
2
3
1
Recording sound from an external unit
TUNING 1
CURSOR
MD
REC
NAME / TIMER / ENTER
TOC EDIT DELETE DISPLAY
2
5 2
3
4
4 5
9 10/0
MD
5
5
AUTO MARK
CD
3D SURROUND
MODE ON/OFF
VOLUME
To stop recording:
Press the MD
To interrupt recording:
RESET
Press the MD
AM ANTENNA
MIC
(STEREO)
Press the MD
number increases.
E-36
MD-ZV30H TINSZ0217AWZZ
Monitor output
Commercially available lead with a stereo plug and phono
plug.
The output of "MONITOR OUT" is fixed.
The output is not affected by the adjustment of the volume
or tone controls.
Auxiliary input
Commercially available lead with a stereo plug and phono
plug.
Press the AUX button on the remote control.
Start playback on the external unit.
Adjust the sound level using the VOLUME buttons of this unit.
Load a recordable MiniDisc.
Press the REC button.
Start playback on the external unit.
Adjust the recording level using the INPUT LEVEL control
when signals are to be recorded.
The maximum level should not exceed 0 dB.
Press the MD button.
0 6
Recording will begin.
button.
button during recording.
0 6
button again to resume recording. The track
0 6