Sharp MD-ZV30 Operation Manual page 37

<P=005>
(Continued)
DISC-1
1
DISC-2
2
DISC-3
3
CD PLAY
ON/STAND-BY CD
VOLUME
3D SURROUND TUNER NAME /
MODE ON/OFF (BAND) TRACK START TOC EDIT
1 2 3
CD MD DIGITAL EDIT
MD/CD/TUNER DIRECT KEY
1 2 3 4
6 7 8 9
ST-MODE TUNER MD
10
BAND
PROGRAM CLEAR P-MODE
REC AUTO
REC
MODE MARK
CD
1 2 3
1 2 3
SLEEP
3D SURROUND
SLEEP DISPLAY TIME
MODE
BASS/
ON/
AUX VOLUME
STAND-BY TREBLE
3
4
5
To set or cancel the sleep operation using the
remote control:
Press the SLEEP button.
To cancel the sleep operation:
Press the SLEEP button twice.
Note:
The sleep time cannot be set using the remote con-
trol.
Sleep timer setting
Start time
Timer playback setting
(Wake-up start)
1 minute - 2 hours
Sleep operation will
automatically stop.
Sleep operation
The radio, compact disc and MiniDisc can all be turned off auto-
TUNING
CURSOR
MD
REC
matically.
TIMER /
ENTER
DELETE DISPLAY
1
Play back the desired sound source.
2 3 4,5 2
Press the TIMER/DELETE button.
3
Turn the jog dial so that the "SLEEP" display appears.
5
4
10/0
Within 10 seconds, press the ENTER button.
If you do not need to change the time, go to step 5.
To change the sleep time:
Whilst the sleep time is displayed, turn the jog dial to adjust the
time.
(Maximum: 2 hours - Minimum: 1 minute)
ON/OFF
The amount of sleep time can also be changed during the sleep
operation.
2 hours - 5 minutes
5 minutes - 1 minute
5
Press the ENTER button.
6
The unit will turn off automatically after the preset sleep time
has elapsed.
The volume will decrease gradually 1 minute before the preset
sleep time has elapsed. At this time, you cannot change the
volume.
To confirm the sleep timer setting:
1
Press the TIMER/DELETE button.
2
Turn the jog dial so that the "SLEEP" display appears.
To cancel the sleep operation:
If the power is turned off, the sleep operation will be cancelled.
The timer operation can also be cancelled as follows if the power
cannot be turned off during recording.
1
Press the TIMER/DELETE button.
2
Turn the jog dial so that the "SLEEP OFF" display appears.
3
Within 10 seconds, press the ENTER button.
The sleep operation will be cancelled. ("SLEEP" will go off.)
Notes:
Once the sleep time is set, it will remain the same duration
until the setting is changed.
This sleep functions of this unit cannot be used to control
equipment connected to this unit. You must use the sleep
functions of the other equipment, if it has them.
Simultaneous sleep and timer operation
1
Play the desired item (compact disc, MiniDisc, etc.).
2
Set the sleep timer.
Desired time
3
Set timer playback.
4
End time
When the preset sleep time has elapsed, the power will be
(Wake-up end)
automatically turned off. When the timer start time is reached,
the power will be turned on again.
Note:
The unit can also be used by a combination of the sleep
timer and timer recording function.
E-35
MD-ZV30H TINSZ0217AWZZ
5-minute intervals
1-minute intervals