Using External Units - Sharp XL-60H Operation Manual

USING EXTERNAL UNITS

VIDEO/AUX (Audio signal) input
External unit
To listen to or record signals from exter-
nal sources through this unit:
1
Use an RCA lead to connect the desired exter-
nal unit to the VIDEO/AUX sockets.
(red right channel, white
When using video equipment (Laser Disc player,
VCR), be sure to connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the
power on.
3
Press the FUNCTION button until "AUX" ap-
pears in the display.
4
Operate the external unit.
5
To record the sound from the external unit, per-
form steps 2 - 4 of the "Recording from the built-
in radio" section on page 27.
Note:
To prevent hum interference, do not place this
unit near television receivers.
*60H/70H(SUK)28-32
CD digital output (optical)
Commercially available digital cable
The CD digital signal from this unit can be re-
corded by other DAT or MiniDisc recorders.
1
Remove the DIGITAL OUT socket cover.
2
Use a commercially available digital cable to
left channel)
connect the unit to the OPTICAL IN socket of a
MiniDisc recorder or a DAT.
3
Put the external unit in the recording mode.
4
Play a CD on this unit.
5
To record the sound from the external unit, per-
form steps 2 - 4 of the "Recording from the built-
in radio" section on page 27.
Note:
Only CD signals can be output.
30
30
DIGITAL
OUT
00.1.5, 11:41 AM